Jibs, Monorails and Gantry Cranes

CraneVeyor provides jib cranes, monorail systems, and double and single leg gantry cranes in a large range of capacities and sizes.

Monorail Systems

Monorails are often supported from building or other overhead structures that are avilable and adequate to support the loads. The monorials may be simple beam design (see CraneVeyor TranStation Enclosed Track), or “Louden or TramBeam” patented track for more extensive curved and interlocking applications. CraneVeyor provides design and installation for structure supported monorails.

Where overhead structure is not available or adquate to support the monorail, a Free Standing Monorail System can be provided.

TranStation Free Standing Monorail

JIB CRANES

Base Mounted - Model BMJ

Base Mounted – Model BMJ

Enclosed Track TranStation Jib Cranes mount to a suitable floor or foundation and are independent of the building. The jibs provide work area coverage with up to 360 degree rotation. Base mounted jibs are often your best and most cost effective materials handling solution. Since no extra support is required Base Mounted TranStation Jibs are the best choice for outside installations and open areas.

Model BMJ Base Mounted Jib Crane Features

  • Durable steel construction with lightweight and strong TranStation enclosed track boom for years of service.
  • Self-aligning ball bushing, top pivot bearing and roller bearing type mast rollers provide easy movement.
  • Mast roller assembly is provided with shims to adjust the boom levelness.
  • Capacities are available from 100# to 1000#, with boom lengths to 16′ and heights under boom to 14′.
  • Included is a trolley for a hook-on hoist or other device and end stops with rubber bumpers.

Wall Bracket (Model WBJ)

Wall Bracket – Model WBJ 

Enclosed track TranStation jib cranes mount to a suitable column or other structure. A qualified engineer must determine that the structure is adequate prior to installation for safety of personnel and property. When properly installed, a wall bracket jib can be your most efficient and cost effective materials handling solution. Up to 200 degree rotation is available.

Model WBJ Wall Bracket Jib Crane Features:

  • Durable all steel construction using a truss design for the mast and the enclosed track boom to provide light weight and years of service.
  • A self-aligning ball bushing at the top pivot pin and a tapered roller bearing at the bottom pivot pin provide ease of rotation.
  • Capacities are available from 100# to 1000#, with boom lengths to 16′.
  • Included is a trolley for a hook-on hoist or other device and end stops with rubber bumpers.

TranStation Jib Crane Options: (For all jib cranes)

  • Festoon trolleys for use with 4 conductor flat cable, round cable or hose
  • Vacuum hose trolleys for use with vacuum hose
  • Large saddle festoon trolleys for welding cable and hose applications
  • 4 cond.-14 AWG flat cable with electrical junction box at rear of boom
  • Air hose or coiled hose for festoon

(For base mounted jibs)

  • Manual rotation stops
  • Bottom entry electrical collector ring or air swivel
  • Top entry electrical collector ring or air swivel
  • Anchor bolts and template
  • Platforms for welding and other equipment
  • Base floor plates for special floor conditions and applications
  • Double WBJ jib cranes on a common column

Model Double WBJ Wall Bracket Jib Crane Features:

A double WBJ type crane setup on a common column is shown above. Each WBJ jib crane supports a welding wire feed to allow the operator to work productively, and there are trolleys with large radius saddles to keep hoses and cables off the floor. An engineered base mounting is provided to secure the column to the concrete slab and platforms are provided for mounting welding power supplies and other equipment-no problem.

Note: a layout drawing, assembly instructions, and manuals are provided with each system.

Shopping Cart